Andreas Guitar Universe Logo
Home  >  Di Box
This website is a participant in the Amazon Services LLC Associates Program. We are reader-supported. If you buy something through links on our site, we may earn an affiliate commission at no additional cost to you. This doesn't affect which products are included in our content. It helps us pay to keep this site free to use while providing you with expertly-researched unbiased recommendations.

The Best Di Box

Generated From 25K+ Reviews!


What does a DI box do?

The primary function of a direct box is to convert an unbalanced high impedance signal from an instrument into a balanced low impedance signal that can be used with a P.A. or recording system.

Can I use a DI box without an amp?

You can start playing without an amplifier by plugging in your guitar. Tone can be changed: You can easily change the tone and settings by recording through a D.I. box or directly into an audio interface.

Does a DI box reduce noise?

External noises are effectively reduced by DI boxes. However, if the noise is caused by the signal itself (due to a ground loop), they will be ineffective. A ground lift switch is typically included with direct boxes. This is used to remove ground loop noise from your signal.

What is the difference between active and passive DI box?

Passive DI boxes do not require power. This is the most noticeable distinction. A power source is required for an active DI box. This could be batteries or phantom power via an XLR jack. An active DI box includes a preamplifier to provide stronger signals and higher input impedance.

Can a DI box be used in reverse?

DI-REVERSE Many people try to use a DI-Box "backwards" to convert a balanced signal to an unbalanced signal. The PDIR (DI Reverse) is a simple and dependable solution that uses a transformer to isolate two connected devices.

Can you plug headphones into a DI box?

D.I. Boxes are not headphone amplifiers and will not function.

Can you plug a guitar into an interface?

The most common method of connecting your electric guitar to a computer is through an audio interface. An audio interface lets you plug in your guitar or other inputs and converts the signal into digital signals that can be sent to your computer via USB.

Do I need a DI with an interface?

When connecting to an input that would otherwise be mismatched, such as a microphone or line input, a DI box is required. The instrument is an additional option available on the majority of computer interfaces. This allows you to connect a guitar or bass directly to your computer.

How much does a direct box cost?

contrast with comparable products. 4.8 stars out of 5There are 262 reviews. The cost is $99.99 to $169.99. Crazy sold it. Dave's DJ Band Provides Good Value Audio Quality: 4.7 / 4.3There are 4 additional rows. 4.6 4.8

What is DI output?

DI-Output: This connects your amplifier to an external recording device. The frequency response of an amplifier describes how well it reproduces the sound of the guitar it is connected to. Bass: These tones are at the low end of the human hearing range.

What's inside a passive DI box?

A passive (non-powered) live audio DI box is typically made up of an audio transformer that serves as a "balun." Balun is an abbreviation for balanced to unbalanced. Nobody is fooled by the name. Baluns are used in audio DI boxes to convert high-impedance, unbalanced lines (input) to low-impedance balanced lines (output).

How does passive DI work?

Passive DI boxes do not require power to convert high-impedance audio signals to low-impedance audio signals. Because they lack active circuitry and a transformer, passive DI boxes are more appealing than active DI boxes.

Do you need a DI box for acoustic guitar?

This is a fantastic idea for guitarists who are recording or performing. It's even better for acoustic musicians or bassists. If you frequently perform live or record in the studio, you'll need a good DI box. This is a fantastic idea for electric guitarists, but it is even better for bass or acoustic guitarists.

Can a DI box provide phantom power?

A DI cannot pass phantom current because it connects unbalanced to balanced signals. This power can only be carried by balanced signals. An active DI's circuitry may be powered by phantom energy because it is unidirectional (unbalanced input signal and balanced output signal).

Can I connect guitar to line input?

You certainly can. A guitar pickup's low-level output is not the same as the high-level input that a 'line-level' input expects to see. This can significantly distort your signal-to-noise spec. When you plug it in, it also causes the pickups to sound different.

Can I connect a mixer to a guitar amplifier?

The mixer is responsible for transferring the sound from your guitar amplifier to the recording device. It makes no difference whether it's a tape recorder or a computer. The most common way to connect a guitar amp to an audio mixer is with a microphone. You can, however, use the direct out to connect it directly to a channel.

Additional Information

What Is a Direct Box and Why Would You Need One?

Di Box Audio Converter/amping system is a special type of audio converter box designed for low level amplification. Its function is to convert the high-quality audio signals to lower voltage signals suitable for use as input signal on any audio or music system. The conversion is done by thermal movement of the signal. Di Box audio converters are used mainly for recording and monitoring purposes. They are available in different models and types, depending upon their function and need.

A DI box is an electronic device usually utilized in sound recording systems and in monitoring systems to link an unbalanced one, high-quality signal, direct one and balanced one, either via an XLR connection or an XLR cable to an optional monitor mix. These devices are available in the market in varying models, configurations and types. Some of them are wireless and therefore can be easily shifted from one place to another while others are fixed and require a fixed location. In addition to their fixed locations, some models are portable and come in a small size that can be carried from place to place. You can easily find a model that suits your requirements.

Generally, a di box is a high quality device that performs its function well even when placed in a room where there is high level of noise. It has an input impedance of 50 ohms which is suitable for any type of recording purpose. Most of these units have separate pre-amp and input connections for inputting an instrument or mic input.

Di Boxes are very popular equipment for studio recording as they can record and monitor high quality audio without disturbing others in the studio. You can record audio at any time and switch between tracks easily when using this device. It is also a perfect tool for live performance. A di box offers you excellent monitoring and recording options.

You can also find several types of di boxes. Some of them come with knobs and are called direct boxes. They are ideal for low frequencies. Direct boxes work on the principal of converting low frequency energy into electrical signals. There are numerous types of low frequency transformers available in the market. Some of them include ezers, J pickups, paxels, spider-boxes and so on.

Another type of Di Box is called RCA jack box and is very popular for its high performance and cost-effectiveness. It is ideal for low frequencies and can capture a bandpass signal easily. The signal is transmitted via one line-level input to two line-level outputs. You can also feed the signal to an amp if you are recording over stereo signals.

If you want to send two signals, one to an audio monitor and another one to your preamp, you can use an AB string mixer box. These boxes have a + and - indication to select which input to use and which output should be amplified. Preamps can handle signals up to 200 volts. These box models are very useful if you want to monitor signals during gigs or rehearsals.

A balanced output signal is produced by a diode. The diode biased to a polarity intermediate stage converts the input signal to an output signal. The bias provides a smooth transition between high and low levels. Diode biased balanced box also has a ground loop and an external switch can be used to control the incoming or outgoing signal. There are two main types of balanced box design - resistive and capacitive.

A Guitar cabled input signal can be mixed by connecting the guitar cable to a four-channel Di Box. Then you can send the signal to an amplifier that acts as a mixer. Or, you can send the signal to a mixer. A resistive mixer uses an electrolytic buffer to change the signal from one state to another.

Capacitive box can produce an output signal to any level by applying an electric field across the terminals of the contacts. An xlr cable is used to transmit the guitar signal to an amplifier. An xlr cable is different from a standard xlr in many ways. First, the receiver doesn't need a phantom power source for its operation; the electric field is self-generated. Also, the amplifier's performance is affected by the amount of RF noise generated by the device.

When all these factors are taken into consideration, the Di Box becomes a great solution. You don't need to deal with any complicated signals or levels and you don't need to convert your signal level to a standard level. The Di Box is a great choice for the beginner and professional audio engineer. Whatever the system you use, you'll benefit from a direct box or mixer.